Roll Form Operator B
Operators in this position set up, operate and adjust rolls to, contour, flatten and/or straighten various types of material such as, sheet metal stock, extrusion and tubing for the manufacture of structural aircraft detail parts. Employment in this position also requires handling, standing, twisting at the waist, walking, flexion/extension, lifting 10-35 pounds, lifting less than 10 pounds, rotation of head/neck, contact with metals, exposure to noise and atmospheric conditions, and the use of personal safety gear for face/eye, hand/arm, ears and feet. Obtain work package from ready to work rack, as delivered to work station or assigned by lead, supervisor, or run previously set-up job by reviewing tie-in from prior operator. Review Work Order (W/O) to determine requirements of work to be performed. Ensure that the correct type and quantity of material were issued. Obtain drawings, templates, Manufacturing Enhanced Data Sheets (MEDS), as required. Perform safety check of machine, ensure that the area around machine is clean of any obstacles (e.g., loose material, tools, oil spills), power switch is off, on pinch points, safety features/guards are installed and that roll is clear of any obstructions. Check fluid levels (e.g., hydraulic oil, grease) call maintenance/facilities to fill, as required. Down load numerical (NC) program to machine controller, initiate cycle to perform roll form operations, as required, per drawing. Handle materials to be rolled in such away that scratches and mars are held to a minimum. Use over head crane to move parts (e.g., to and from freezer), as required. Set up, adjust, position rollers for a given type of radius called out by drawing, (W/O), (e.g. half moon contour, corrugated, full coil spool) to prepare parts for heat treatment per (BAC) specifications, as required Obtain heat treated parts from freezer, to flatten and/or straighten to drawing, (W/O) per (BAC) specifications, and perform hand work using rubber hammer, as required. Select proper machine accessories (e.g., rolls, dies, guide blocks, cams, shims), identify fixtures, shop aids or templates, as required. Assist higher grade employees to finish parts (e.g., hat sections, zee sections) by performing, manual roll form work, hand finish to correct shape and tolerance using (e.g., steel hammer, rubber mallet, arbor press, foot shrinker), check work against fixture/template, per (BAC) specifications. Ensure all detail parts are correctly identified and part marked (e.g., part number, ramac number) per (BAC) specifications, as required. Perform on line computer work using enterprise resource planner (ERP), at completion of job assignment. Transport finished parts, using appropriate material handling equipment (e.g., man aboard stacker), as required. Handle and dispose of hazardous materials in approved manner (e.g., oil coolants, shop towels). Use precision measuring tools necessary to accomplish work assignments. Maintain personal and tool certification, as required. Contact fellow workers, lead, or supervisor when assistance is needed, or a problem arises.
Competencies
Attention to detail; ensure all paperwork and computer data have been completed accurately.
Competencies
Determine if own work is complete and correct as specified by instructions, drawings and specifications.
Competencies
Effectively communicate written information such as tie-ins, planning or engineering change requests and reports.
Competencies
Follow oral/written instructions provided by the lead or supervisor.
Competencies
Investigate and resolve problems; devise and implement solutions.
Competencies
Knowledge of proper use, handling and disposal of hazardous materials per government regulations and Boeing procedures.
Competencies
Knowledge of safe working practices, emergency procedures and possible dangerous situations.
Competencies
Mechanical ability, manual dexterity, and hand/eye coordination required to perform various projects, per engineering definition and verbal or written instructions.
Competencies
Operate computing equipment to access job information (e.g., drawings, specifications and other online information systems).
Competencies
Operate man aboard electric stackers in a safe manner.
Competencies
Operate overhead cranes in a safe manner.
Competencies
Organize, plan, and sequence work efficiently.
Competencies
Read and interpret engineering drawings. Capable of visualizing a three-dimensional shape from a two-dimensional view, converting left-hand to right-hand views and understanding symbols, flag notes, and general notes.
Competencies
Set-up and operate various mechanical and hydraulic forming/punching presses using conventional and/or electronic controllers to fabricate close tolerance, high quality parts from various materials.
Competencies
Think before acting,"""" (e.g., anticipate outcome of an action, know if something looks wrong) and ask questions when necessary.
Competencies
Understand the application of technical documents/information such as BAC specifications, manufacturing plans and safety information.
Competencies
Use math that includes addition, subtraction, multiplication, division, decimals and fractions.
Competencies
Use various types of hand tools and/or hand-held power tools.
Competencies
Use various types of precision measuring tools.
Competencies
Work alone/independently. Coordinate daily tasks with others to align priorities for smooth operation of joint workloads.
Competencies
Work with others as part of a team which includes giving and receiving feedback, assisting others in completion of tasks; possess interpersonal, listening, and participation skills.
Basic Qualifications For ConsiderationDo you have tool interpretation and Blue Print reading background?
Do you have experience using precision measuring tools?
Typical Education/Experience
High school graduate or GED preferred.
Other Job related information
This is an hourly position governed by the IAM Collective Bargaining agreement. Resumes of current Puget Sound Boeing employees submitted via BESS will not be considered. Current Boeing employees working in Puget Sound, Wichita and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
- Business Unit Commercial Airplanes
- Division Bca Supply Chain Mgt & Ops
- Program Fabrication
- Job Type Hourly
- Experience Level Entry
- US Person Status Required? Yes
Closing Date: 02/21/2012
